What do it engineers fear most in summer? Running weak current wells will definitely be among them. Usually, the network fails and the number of equipment is small. There is no need to run upstairs and downstairs. It's OK to adjust to the weak current well. However, in the newly-built network, if hundreds of switches are all online for operation and maintenance through the command line, the problem is not in the hot weak current well for a few hours, and they can't get out at all




It is said that the network starts like a battlefield: switches are configured online one by one, checked one by one offline, and the configuration files of old devices need to be exported and imported to replace them. Occasionally, when there are more devices, it is easy to panic and make mistakes




There is a way to open the park network of nearly 10000 people by sitting "still". Do you want to know? Today, let's introduce the Trinity start method of Xinrui, and see how it engineers with Xinrui black technology can finish all the network starts sitting down!




The first step: move the box and scan the bar code



According to the original construction method, the construction personnel put the switch equipment into the weak current well, and use the Xinrui assistant - construction assistant tool to add items and scan the code to register the use position of the equipment. The equipment information can be imported into the network controller through one click download to save the trouble of manual memory.




The second step of the opening: the connection is powered on and the topology is self generated



Compared with the way of "traditional configuration online one by one" or "drawing topology through network management configuration one by one, and then connecting and issuing configuration as required", the switch can be found automatically only by connecting to the Internet line at the beginning and online. At this time, the engineer only needs to select the equipment to be online in the topology for batch activation.




Step 3: configure the topology



Based on the visual topology, engineers sitting in the management room can complete the network configuration distribution of all switches by dragging and selecting, batch editing, etc., so as to realize the normal operation of the switching equipment of the whole network and quickly complete the start of the whole switching network without configuring switches one by one.




Through these three steps, it engineers do not have to stay on the site to debug one by one, and the network starting efficiency is greatly improved. So, how does Xinrui technology realize remote debugging? The answer lies in Xinrui SDP discovery protocol. The SDP supports the delivery of information between the key devices and the default SDP.
​